All posts in “coupe”

Lamborghini Huracán Sterrato prototype spied testing in the snow

Back in the summer of 2019, which seems like so much longer than two and a half years ago at this point, Lamborghini showed an interesting concept called the Huracán Sterrato. It was a lifted, widebody version of the mid-engine supercar, and its name literally translated to dirt. It was quite cool, and surprisingly grounded. And it must’ve been received well not just by us, but possibly customers, because these spy photos seem to indicate Lamborghini is working on a production model.

There are a few indicators, but the most clear is the fact this test car has a noticeably taller ride height than its pavement-pounding predecessors. The concept, for reference, had an extra 1.85-inches of ground clearance. Furthermore, the prototype is sporting roof rails like those seen on the concept. Some other interesting additions that may or may not indicate plans for the production car include the skid plate up front, the additional lighting on the hood, and a new roof scoop up top. They’re all clearly temporary additions, but the concept had bodywork that suggested some sort of skid plate, as well as auxiliary lighting. The roof scoop is a bit of a head-scratcher, though. We’re not one to turn down a sweet mid-engine supercar scoop, but roof rails would seem to suggest carrying stuff on the roof, which would seem to directly block said scoop. On the other hand, that scoop could provide cleaner air when out in the dirt.

Missing from the concept are the fat fender flares, but that’s not too much of a surprise. We would expect the powertrain is basically the same as that of the Huracán Evo with a naturally aspirated V10 and all-wheel drive. It will probably have specific driving modes that adjust the traction and stability control systems for sporty, slippery driving conditions. We could also see the car being shown sometime either this year or next year, since it will likely be based on the current Huracán.

Related Video:

2023 Chevy Corvette, including Z06, reportedly a few months away

After getting eyes on a memo General Motors sent to Chevy dealers, the Corvette Action Center site has posted some key dates and information concerning the 2023 Chevrolet Corvette. We’re not sure if it’s because of the new generation or “the new normal” in the state of world affairs, but the coming model transition won’t be like those in recent memory.

First, the dealer order guide for the 2023 Corvette is two months away, coming out on March 21. Three days later, on March 24, dealers will be able to begin placing orders for next year’s coupe and convertible. CAC says the online configurator for keyboard tire kickers will launch that day, too. On March 31, dealers will be able to begin pairing orders with their Corvette allocations.

Six weeks later, on May 6, 2022 Corvette production is expected to end. 

Here’s the first departure from the norm: Instead of Bowling Green Assembly Plant taking the traditional one- or two-week gap between model years, 2023 Corvette production is slated to begin on May 9, three days after the last 2022 leaves the line. That May 9 date matches the date Corvette Blogger and GM Authority posted as the commencement of 2023 Corvette production in November 2021.

That brings us to the second switchup in Corvette production. In previous years, GM kept allocations of standard Corvettes separate from the Z06. For the C8, Corvette allocations won’t be separated. This suggests that 2023 Corvette Z06 production will begin on May 9, the same day as the standard car. Furthermore, with the C7 Corvette Z06, GM based dealer allocations on how many Z06s the dealer had sold the previous year. With the C8, GM will use a dealer’s Average Daily Supply to gauge how quickly that dealer is selling Corvettes, then determine how many of each Corvette the dealer gets.  

If all of these dates hold, the 2022 Corvette would have spent just eight months in production, having started down the lines on September 6, 2021. With the 2023 Corvette Z06 having sucked all the air out of the room — in part to power its brand new and massively powerful V8 — we don’t expect much beyond small cosmetic and option changes for the standard Corvette for the coming model year.

Related Video:

2020 Audi R8 Decennium gets six-speed manual conversion

One of the best manual transmissions ever put on the market was the gated six-speed in the first-generation Audi R8. That silken, row-your-own warrior departed to the afterlife with the introduction of the second-gen car in 2015, replaced by a seven-speed dual-clutch gearbox. But if money can resurrect whole and long-dead car brands, it shouldn’t have any problem with a few hunks of metal in a bell housing, no? It won’t, so long as there’s a well-heeled customer on one side, Underground Racing on the other, and a 2020 Audi R8 Decennium in the middle. Oh yeah, and a couple of turbos.

The Dallas-based customer owned one of the 222 R8 Decennium special editions that Audi produced to commemorate a decade of the 5.2-liter V10 and motorsports success — only 50 of the cars came to America, each producing 602 horsepower and 413 pound-feet of torque. He requested a twin-turbo kit from Charlotte, North Carolina-based Underground Racing, the shop specializing in R8 and Lamborghini builds. While they were toiling in back of the car, he also requested they swap that dual-clutch for a manual. The result is a riotously double-boosted V10 with 1,500 horsepower and six forward ratios chosen by hand. Underground Racing told Road & Track they started with the gearbox from a 2012 Audi R8 and reworked it with custom parts to make it fit, manage the power, and be daily-drivable. The task also involved installing a JRR engine management system to shepherd the reconfigured drivetrain.   

In the cabin, UR removed the square section that houses the seven-speed dual-clutch shifter, replacing it with what looks like a custom fabbed gate giving off Ferrari vibes. It’s quite nice. Intriguingly, the R8 retains its paddle shifters behind the steering wheel. UR says these paddles have been equipped with “rolling antilag,” plus “launch control, drift mode, and more.” Curiouser and curiouser. The R8 Decennium was finished off with tweaks like a custom billet intake and custom-finished, center-lock wheels mimicking those on the Huracán Performante,  

With one six-speed conversion done, UR says it’s ready to do the same for any other manual-craving R8 owners, but the swap can only be added onto a twin-turbo kit. That means spending at least $49,000 for the Base Twin Turbo System that takes an R8 up to 800 wheel horsepower on 93 pump gas, before adding the cost of the manual transmission work. Underground Racing says it will release pricing for the six-speed manual kit soon, and we assume the new gearbox will be included in UR’s two-year, 24,000-mile warranty for peace of mind along with power and proper shifting. 

Hennessey Venom F5 continues high-speed stability testing

Having just posted about Hennessey putting its Venom F5 “Fury” engine on the dyno, we wondered when the total package would be showed on test. Well, here you go. The Lone Star manufacturer of gangbuster machines took a Venom F5 to the Johnny Bohmer Proving Grounds on Merritt Island, Florida, for high-speed stability and vehicle dynamics testing, with ex-GM engineer John Heinricy on piloting duties.

This follows other speed runs in places like Hennessey’s Sealy, Texas, home base, the UK’s Silverstone Circuit, and a runway at an ex-U.S. Air Force base in Arkansas. The day had nothing to do with testing the upper limits of the car’s velocity, merely how the Venom felt as it approached those limits. Having said that, Hennessey tells us that when Heinricy chose the F5 driving mode, he made it past 250 miles per hour at least once. 

That F5 setting unlocks the entire 1,817-horsepower potential of the 6.6-liter twin-turbocharged pushrod V8 nicknamed “Fury” when the tank is filled with E85. When not in that mode, the redline comes down by 300 rpm, to 8,200 rpm. 

It’s said there’s a proper top speed run planned for the not-too-distant future, again on Merritt Island, along with testing runs at Texas’ Circuit of the Americas and California’s Laguna Seca. Before the year is out, we should know if the Venom will be equal to the purpose it was created for: hitting 311 miles per hour. With a hotspur goading it on, the Venom F5 certainly does make a sweet noise on the way up there.

First 2023 Chevrolet Corvette Z06 to be auctioned

We expect the 2023 Chevrolet Corvette Z06 to break at least one record before the coming super-coupe has been objectively timed and tested. Barrett-Jackson will auction the first retail example of what should be the most amazing Z06 the world has ever seen during the auction house’s annual Scottsdale, Arizona, event on January 29 at around 8:30 p.m. The last charity Corvette the auction house sold was the first 2020 C8 Corvette, which NASCAR team owner Rick Hendrick bought for $3 million. With his winning bid, Hendrick set the benchmark hammer price for a Barrett-Jackson charity car, and eclipsed the $2.9 million paid for the last front-engined Corvette in 2019. Although not assured, it doesn’t take much imagination to conceive of bidding for the 2023 Z06 cruising right past $3 million to a new record.  

Whatever the final tally is, every cent of the hammer price for lot #3009 will be donated to a charity called Operation Homefront, Barrett-Jackson forgoing its usual fees. The 20-year-old nonprofit Operation Homefront exists to help the post-9/11 wounded, military families, and veterans with financial assistance and housing support.

The car on the block will be a stand-in hardtop, not convertible, the Z06 not scheduled to enter production until September of this year. It sounds unlikely the winning car will be VIN 001, with language noting the coupe could be “subject to a state-issued VIN and/or other state requirements” depending on where the owner hails from. After winning, the buyer will be invited to configure what will be the first retail example of the production line, meaning choosing one of 12 exterior colors and seven interior and wheel treatments, then making the even bigger choice of whether to append the Z07 Performance Package that adds frills like a big rear wing, canards, and carbon fiber wheels.

And with two more powerful Corvette versions thought to be on the way — the ZR1 and the performance hybrid perhaps called Zora or E-Ray — the Z06 likely won’t hold for long the benchmark among its kind for price at the gavel.

As for the everyday buyer, it’s going to require a few trips around the sun to take delivery of a new Z06 even for those who put reservations in months ago. Buyers in one thread on the C8Z06 forum talked about making $2,000 refundable deposits with one dealer as soon as the reservations system opened, then being told they were as far back as between 4,000 and 5,000 on the waiting list. And that’s just one dealer. Might not be too soon to start thinking about putting money aside and making friends at a dealership to get a good shot at the C9.

Related video:

Zombie cars: Discontinued vehicles that aren’t dead yet

Car models come and go, but as revealed by monthly sales data, once a car is discontinued, it doesn’t just disappear instantly. And in the case of some models, vanishing into obscurity can be a slow, tedious process.

That’s the case with the 12 cars we have here. All of them have been discontinued, but car companies keep racking up “new” sales with them.

There are actually more discontinued cars that are still registering new sales than what we decided to include here. We kept this list to the oldest or otherwise most interesting vehicles still being sold as new, including a supercar. We’ll run the list in alphabetical order, starting with *drumroll* …

BMW 6 Series: 55 total sales

BMW quietly removed the 6 Series from the U.S. market during the 2019 model year. It had been available in three configurations, a hardtop coupe, a convertible and a sleek four-door coupe-like shape.

BMW i8: 18 total sales

We’ve always had a soft spot for the BMW i8, despite the fact that it never quite fit into a particular category. It was sporty, but nowhere near as fast as similarly-priced competitors. It looked very high-tech and boasted a unique carbon fiber chassis design and a plug-in hybrid powertrain, but wasn’t really designed for maximum efficiency or maximum performance. Still, the in-betweener was very cool too look at and drive, and 18 buyers took one home over the course of 2021.

Chevy Impala: 750 total sales

The Impala represented classic American tastes at a time when American tastes were shifting away from soft-riding sedans with big interior room and trunk space and into higher-riding crossovers. A total of 750 sales were inked last year.

Chrysler 200: 15 total sales

The Chrysler 200 was actually a pretty nice sedan, with good looks and decent driving dynamics let down by a lack of roominess, particularly in the back seat. Of course, as we said regarding the Chevy Impala, the number of Americans in the market for sedans is rapidly winding down, and other automakers are following Chrysler’s footsteps in canceling their slow-selling four-doors.

Even if Chrysler never really found its footing in the ultra-competitive midsize sedan segment, apparently dealerships have a few leftover 2017 200s floating around. And for some reason, 15 buyers decided to sign the dotted line to take one of these aging sedans home last year. Interestingly, Chrysler sold nine 200s over the course of the 2020 sales year, so sales were actually up in 2021 for a sedan that ended production in 2017.

Chrysler Town & Country: 4 total sales

We’re not sure how Chrysler dealers were able to log four Town & Country minivan sales last year, but here we are. Chrysler pulled the plug on its long-running minivan way back in 2016 when it was replaced by the sleek Pacifica. We hope those buyers got really solid deals.

Dodge Dart: 10 total sales

Dodge discontinued the compact Dart back in 2016, just three years after its launch. The automaker just wasn’t able to compete with the segment leaders like the Honda Civic or the sales juggernaut that is the Toyota Corolla. Despite the fact that it’s been dead for several years, Dodge managed to sell 10 Darts in 2021. A year ago, Dodge managed to move seven of ’em, so again, that’s improvement!

Dodge Viper: 4 total sales

Dodge discontinued the rip-roaring Viper after the 2017 model year, but there are still a few left in dealerships around the country. Over the course of 2021, Dodge managed to sell four SRT Vipers.

It’s interesting to think that these buyers had the option of driving home in a brand-new mid-engine Corvette, but chose to go in an entirely different direction. Something tells us they won’t be disappointed with its 640-horsepower naturally aspirated V10 engine, even if it’s mounted way out in front of the driver instead of the preferable sportscar location behind the passenger compartment.

Fiat 500: 51 total sales

Fiat hasn’t exactly pulled itself entirely out of the U.S. market, but it’s close. A quick glance at the Fiat USA website shows only one vehicle, the 500X crossover. Gone are the original 500, pumped-up 500L and 124 Spider. Let’s all collectively hope the 51 500 buyers last year opted for Abarth models.

Infiniti QX30: 1 total sale

The Infiniti QX30, a collaboration designed and built with Mercedes-Benz, ended production after the 2019 model year. Still, one single solitary little crossover was sold to a new buyer in 2021. Odd choice; we hope they got a good deal.

Jeep Patriot: 16 total sales

Jeep discontinued the Patriot in 2017 when it introduced the latest version of its compact Compass crossover. Despite the fact that it’s three full model years old, there are still some Patriots milling about on Jeep dealerships across America. In total, Jeep sold 16 Patriots in 2021, which somehow is 13 more than they sold in 2020.

Nissan 370Z: 36 total sales

Nissan axed the 370Z Roadster after the 2019 model year, with the replacement Z coming in 2023 with a twin-turbo V6 engine that spins out 400 horsepower. Earlier this year, Nissan confirmed in a statement to Autoblog that there were still a few 370Z stragglers sitting on dealership lots in 2021, with the total tally standing at 36 sales.

Toyota FJ Cruiser: 1 total sale

And now we come to the final, and oldest, new sale made by any automaker over the course of 2021. Somehow, some way, a lone Toyota dealership held on to an FJ Cruiser, a model that ended production in 2014, and sold it to a new buyer in 2021. To them we say: Congratulations. You bought the oldest new car in America (that we know of), and it’s a cool one. Enjoy.

Spyker is back again, maybe

The motto of Dutch car company Spyker was, “Nulla tenaci invia est via.” That’s Latin for, “For the tenacious, no road is impassable.” If nothing else, no other outfit has lived its motto more fully than the outfit still headed by Victor Muller. After buying Saab in 2010 and foundering under the purchase, going bankrupt in 2014, being bought by private equity in 2015 and foundering again, declaring new investors in 2020 before going bankrupt again in 2021, we have another new announcement that Spyker is back. The investors this time are the same as in 2020 — when funds never came through and Spyker went bust again — Russian businessmen Boris Rotenberg and Michail Pessis. According to a press release, a new round of meetings last month led to new agreement between all parties about the direction of the company, so hands will finally get to work building new cars.

Rotenberg owns SMP Bank in Russia, title sponsor of SMP Racing that Rotenberg co-owns with Pessis. He also co-owns energy company SGM Group and runs BR Engineering, which entered the BR Engineering BR1 in the World Endurance Championship. Pessis owns luxury firm Milan Morady out of Luxembourg and the automotive tuner R-Company in Germany. Both are Spyker owners, Pessis saying in August 2020, “Since Boris Rotenberg and I ordered our first Spyker almost a decade ago, we passionately fell in love with the beauty and craftsmanship of these hand-built sportscars. As of 2015, the cooperation with Spyker intensified through Milan Morady, which now culminates in the collaboration agreement announced today. Moreover BR Engineering and Milan Morady have for the past few years already been involved in the development and production of a number of Spyker C8 Ailerons in so-called Limited Edition BR configuration in our German facilities.” 

Muller wants to pick up where Spyker left off years ago, building the C8 Preliator (pictured) and B6 Venator cars, and D8 Peking-to-Paris crossover starting this year. The Preliator debuted in 2016 as the most recent version of Spyker’s core C8 model in production since 2000, powered by a supercharged version of the 4.2-liter Audi-sourced V8 that was Spyker’s favorite engine. The Venator was from 2013, powered by a V6 to provide a lower cost of entry to the range. The D8 was from 2009, once touted to employ a V12, then rumored with that Audi V8. The brand wants to go racing again, too. That could be down the line, but backing from SMP Racing could make such a venture much easier.

We don’t know which cars will come to life this year, if any, but we’ve been promised that any which do come will use internal combustion engines. They’ll also employ an international workforce; Germany and Russia will lead model development, Russia will supply carbon fiber bodies, the hand-built workforce will toil in a new production facility in the Netherlands, Luxembourg accountants will attend to Spyker’s finances, and there will be new service centers in the South of France and somewhere around the Benelux area.  

The caveat to all of this is that the presser informs us, “As soon as a written agreement is reached and the use of trademark rights secured, activities can restart.” Spyker has taught us that anything can happen on the way to the finish line, so perhaps hold off on sending deposits to the Netherlands just yet.

Koenigsegg’s resolution for 2022 is to launch a new hypercar

Koenigsegg’s resolution for 2022 is one that most enthusiasts can agree with: “more ultimate performance.” While details are few and far between, the Swedish firm published a dark preview image on its social media channels that gives us an early look at a new hypercar.

As is often the case, the photo asks more questions than it answers. What’s intriguing is that the model seems to wear a far more angular exterior design than the 1,600-horsepower Jesko, which is characterized by curved lines. Even the Agera RS was more rounded. We won’t go as far as calling the new car retro, but it’s certainly worth noting that Koenigsegg’s early models (like the CC8S) were also rather square.

Another point worth bringing up is that throwback design cues sell well in the supercar and hypercar segments. Bugatti had no trouble selling 10 examples of the Chiron-derived Centodieci, which is a tribute to the EB110 built in the 1990s. And, the born-again Lamborghini Countach was sold out before its unveiling in 2021; it’s limited to 112 units. Koenigsegg’s CC8S is turning 20 in 2022, if you catch our drift.

We’re told that Koenigsegg will deliver more ultimate performance through “clever engineering and optimal design,” so the new model likely has a few tech tricks up its sleeve. It won’t be the kind of technology that’s dominating CES 2022: Koenigsegg has made it clear that its customers want to drive themselves and that an autonomous car isn’t in its pipeline. However, the company is experimenting with extremely innovative ideas in the powertrain department (its four-seater Gemera is powered by a 1,700-horsepower gasoline-electric hybrid powertrain built around a camless three-cylinder engine) so it’s reasonable to assume that the new model’s specifications sheet will surprise us.

Color us intrigued, then. More information about the next Koenigsegg model will emerge in the coming months.

Related Video:

Father of Disco’s Cizeta-Moroder had ’80s looks, double pop-up lights and a V16

Auction house RM Sotheby’s is giving collectors with a penchant for obscure Italian supercars from the 1980s a rare opportunity. One of the classics it will offer during its January 2022 sale is the original Cizeta-Moroder V16T prototype that was displayed at several car shows.

Cizeta-Moroder isn’t a household name. When you think “Italian wedge,” odds are you imagine a Lamborghini Countach (or maybe a slice of parmesan). The short-lived company was founded by former Lamborghini test driver and engineer Claudio Zampolli with funding from music producer and composer Giorgo Moroder, who is also known as the Father of Disco. Bertone’s Marcello Gandini was commissioned to design the car, and Zampolli decided to power it with a 6.0-liter V16 engine in order to one-up better established supercar firms like Ferrari.

Mounted transversally behind the passenger compartment, the naturally-aspirated 16-cylinder engine sent about 520 horsepower and 398 pound-feet of torque to the rear wheels via a five-speed manual transmission. These numbers were huge for the late 1980s when Lamborghini’s Countach put 449 horses under your right foot and a BMW M3 was rated at 220 horsepower. Zampolli and Moroder worked together long enough to build a running and driving prototype but the relationship between the two men quickly soured. The car was consequently renamed Cizeta V16T, and Zampolli built nine additional examples before his company filed for bankruptcy in 1994.

The original prototype is the only example built with “Cizeta-Moroder” badging, and it’s still owned by Moroder. RM Sotheby’s explains that the prototype was unveiled in December 1988 at an upscale gathering held in Los Angeles and hosted by Jay Leno. It was also displayed at the 1989 editions of the Los Angeles and Geneva auto shows. Several key details differentiate it from the production versions: the air intakes on both sides are bigger, and parts like the turn signals, the door mirrors, and nearly everything inside are specific to chassis number 001.

Moroder reportedly had the car refurbished by California-based Bruce Canepa in 2018 after keeping it in storage for many years. It’s said to be in running and driving condition and its odometer displays 322 kilometers, which represents approximately 200 miles.

If you think this V16T belongs in your collection, you’re in luck: it’s scheduled to cross the auction block during an RM Sotheby’s sale taking place in Phoenix, Arizona, on January 27, 2022. We don’t have a pre-auction estimate yet, but nothing suggests that the winning bidder will score the deal of a lifetime. In 2021, RM Sotheby’s sold a 1993 model (chassis number 101) for $665,000. We’re guessing that the original prototype will sell for considerably more money considering its historical significance and the fact that it’s a documented one-owner car.

Several other classic cars shaped like a door stop will be looking for their next home in Phoenix in January 2022. RM’s catalog also includes a 1971 Ferrari 365 GTS/4 Daytona Spider, a 1995 Ferrari 512 M, a 1978 Maserati Bora 4.9, and a no-reserve 1981 DeLorean DMC-12. 

McLaren Artura hybrid supercar delayed until second half of 2022

The new hybrid McLaren Artura is officially delayed. A report from Automotive News broke the news on the electrified supercar.

When McLaren officially revealed the Artura, it promised that deliveries would begin in the third quarter of 2021. The third quarter of this year has long since gone, and we’re about to head into 2022, and there are still no Artura deliveries taking place. The new target date for initial deliveries is set for July 2022. 

Automotive News heard confirmation of the delay from a McLaren spokesperson.

“We held on longer than everybody else in terms of stopping production, but unfortunately, our semiconductor supply dried up,” the spokesperson said. “That made us have to reduce production across the board.”

So, there’s your reason for the delay, too. McLaren is blaming the chip shortage that is currently plaguing the entire automotive industry. It’s unfortunate, because McLaren could certainly use the new Artura to freshen up its lineup. Automotive News reports that McLaren originally meant the Artura to make up 40% of its deliveries in 2022. With the delay until July next year, that’s going to be a difficult number to approach.

In case you needed a reminder, the Artura is a totally new McLaren from the ground up, as it’s sporting a new platform, new twin-turbo V6 engine and a plug-in hybrid electric system for purely electric motoring — 19 miles with a full battery pack. The engine and electric motor combined produce 671 horsepower and 531 pound-feet of torque, sending it to 60 mph in just 3.0 seconds. Base price for the Artura is $225,000.

Related video:

2022 Ford GT Heritage Edition celebrates Alan Mann Racing

2022 will be the last model year for the Ford GT, the craftsmen at Multimatic turning out the last of the 1,350-unit production run. We already knew there’d be one more Heritage Edition coming, Ford using this year’s Monterey Car Week to reveal models that would honor the original 1964 prototypes. Now Ford Performance has teased a second Heritage Edition for next year, this one a nod to England’s Alan Mann Racing. The Surrey-based race shop prepped Fords for races like the Monte Carlo Rally and Tour de France Automobile before becoming a European factory team in 1964. AMR ordered five GT40 MkI racers with the small block 289-ci V8, intent on honing them to win Le Mans. Ford sent just two of the five before changing focus to the GT40 MKII powered by the 427-ci big block, believing the 289s couldn’t get the job done.

Mann had his way with the two cars anyway, reskinning them in aluminum, designing a new coil-spring suspension, an oil fill tube accessed through the clamshell rear end, and Phil Remington’s quick-change braking system. Called the AM 1 and AM 2, Mann entered both lightweight GT40s wearing his trademark Monaco Red, gold, and white livery in the 24 Hours of Le Mans in 1966, leading the race for a brief spell before having to retire both cars. Ford then had Holman Moody convert the car to into a 427 MkII B model, but never homologated nor raced it, then had Holman Moody revert AM 1 to its Weber-carbed 289-ci spec. That original coupe has made a few appearances at Pebble Beach recently, owner Rex Meyers pulling it onto the lawn for judging and a sound check in 2019 — the first time it had been on display since 1968. Now Gooding & Company has put AM 1 up for auction this year with a pre-sale estimate of $7 to $9 million.

On a side note, Ford’s factory team won Le Mans twice with the 427-ci GT40s, retiring immediately after the win in 1967. John Wyer then created his own lightweight GT40 racers known as the Mirage cars, powered by the 289-cubic-incher, and won Le Mans in 1968 and 1969. 

AM 1 wore the #16 in its roundel, and this is the car the new Ford GT Heritage Edition references by having “16” painted on the underside of the rear wing. Yes, it would be awesome if Ford went all the way with the AM 1 honor and rolled out a lightweight GT, but here’s to dreaming. Back on Earth, expect a lively paint job and a 3.5-liter twin-turbo EcoBoost V6 with 660 horsepower and 550 pound-feet of torque, akin to the previous GT Heritage Editions. Production will start sometime early next year, we await word on how many of the Alan Mann units are on the way.

Related video:

Unique Bugatti Chiron Pur Sport shows off customizing program

It’s strange, but there’s really no shortage of incredible supercars to pick from nowadays. Ferrari, Lamborghini, McLaren, Pagani, Koenigsegg, Bugatti, Aston Martin and Porsche, among others, are continuously rolling out ever faster, rarer and more unusual supercars. And as a result, buyers want more than just a choice of paint and interior colors to pick from. They want unique color schemes to stand out from the other supercar owners. Automakers such as McLaren have learned this with programs like MSO, and now Bugatti is launching a service called Sur Mesure, which translates to “tailored.” And its first customer car is the Bugatti Chiron Pur Sport GP Sur Mesure you see above.

According to Bugatti, the car is a tribute to racing driver Louis Chiron, who won the 1931 French Grand Prix driving a Bugatti Type 51. The custom Chiron Pur Sport features the same style “32” on the outside and embroidered on the seat backs as Chiron’s Type 51. That number is hand-painted on the doors, as are the “EB” logo patterns on the front and rear fenders. Based on photos of the paint process, it seems some intricate masking was used, requiring careful removal after painting. The exterior paint color is a new hue that was created to match that of 1930s Bugatti race cars.

Inside, the Chiron Pur Sport is mostly black and red Alcantara. The most unique aspects are the door panels that feature the same type of “EB” pattern as on the fenders, but this time with embroidery. The car also gets black anodized aluminum trim panels with silver logos.

No pricing was given for this one-off Bugatti, nor were any estimates for services given. This is likely because every project will be different depending on the customers’ ideas, so the amount of time and cost will vary. Seeing as customers will be guided through the process and receive truly custom cars at the end, ones based on cars that already have seven-figure price tags, the costs must be mighty high.

Related Video:

Aston Martin V12 Vantage shows off sound, will return in 2022

According to Aristotle’s fourth-century History of Animals, swans “are musical, and sing chiefly at the approach of death.” Scientists still debate the accuracy of this statement, but we don’t think anybody is going to argue with the melodic tones of the swan song that is Aston Martin’s V12 Vantage. Listen for yourself in the video up above.

We’ve been expecting this. We saw spy shots in August of a hardcore Vantage mule out testing on the Nürburgring that was fitted with all manner of enhancements that led us to believe a twin-turbo 5.2-liter V12 may be under its vented hood. Later, the rumormill was aflutter with reports that the British marque was planning to bestow its smallest car with big power courtesy of a V12 tuned to deliver a reported 670 horsepower. That’s 20 ponies fewer than the Speedster’s twelve-cylinder, which spins out 690 horsepower and 555 pound-feet of torque.

We don’t know much more than that, for now. Aston Martin’s teaser says the V12 Vantage returns in 2022, we’d guess as a 2023 model, and that it will be labeled a Final Edition. We’re certain the number produced will be limited, so if this is the beautiful swan song you’ve been waiting for, now would be a good time to get your finances in order.

Related video:

ItalDesign begins delivering exclusive 710-hp Nissan GT-R50

Italian design house ItalDesign has reached a major milestone. It has finished building the first five examples of the GT-R50, a limited-edition supercar based on the GT-R and developed jointly with Nissan, and it has sent the initial batch of cars to customers around the world.

Unveiled as a concept in June 2018, and introduced as a production model in December of that year, the GT-R50 was created to celebrate the 50th anniversary of both ItalDesign and the GT-R. It’s clearly an evolution of Godzilla, but it wears a specific design that gives it a more futuristic look than the regular-production car. Each coupe is tailor-made by hand in Turin, Italy, and the firm notes that it won’t build two identical units. Customers are invited to configure their car by selecting the exterior paint and the interior materials, among other details.

One of the first cars draws inspiration from the GT-R show car presented in 1972; ItalDesign developed a paint color called Verde Kenmeri specifically for it. Two of the others look a lot like the concept presented to the public at the 2018 edition of the Goodwood Festival of Speed.

Production is limited to 50 units globally; it will be interesting to see how the rest of the series is configured. And, while we’re not expecting to see a GT-R50 with 200,000 miles cross the auction block in 2030, it’s a model that meets the same standards as the regular GT-R. Nismo notably participated in the development process to ensure the GT-R50 delivers performance and reliability on par with the GT-R. This was easier said than done: about 12% of the parts that make up the 710-horsepower engine are new, including the turbochargers, the pistons, the connecting rods, and the crankshaft. Lessons learned from years of racing in the GT3 category helped shape many of the changes.

ItalDesign hasn’t revealed if there are build slots left. If you’re interested, keep in mind the GT-R50 carries a base price of $1,126,799.

Aston Martin Valkyrie begins production in dashing green dress

A new era of hypercars is officially born today, as the first production Aston Martin Valkyrie rolls off the line. That’s right, the Valkyrie is officially starting its extremely limited production.

The Valkyrie entering production now also means that Aston Martin has beaten Mercedes and its competing hypercar, the AMG One, to production — both cars saw their “debuts” in 2017. Last we heard from Mercedes on that front, the AMG One was still undergoing testing. Updated timing on the car’s production release was not detailed in this announcement that took place over a year ago. Perhaps those who ordered the AMG One have more insight on when their specific cars will be built, but for now, the production car is still floating out there in the ether.

Meanwhile, Aston Martin says the first Valkyrie, pictured in green here, is awaiting delivery. Aston does not say who the first owner is or detail the spec of the car, but we applaud the dark green paint chosen.

Aston Martin Valkyrie production start

“It is an immensely proud moment for us to complete our first ever hypercar,” Aston Martin CEO, Tobias Moers said. “The Aston Martin Valkyrie program has tested everyone who has worked on it to the limit but the commitment to the dream has produced a truly incredible car, an F1 car for the road.”

Production for the Valkyrie is taking place in a special Valkyrie-only area of Aston’s Gaydon headquarters. A small team of technicians spend over 2,000 hours total to build each car, and there will be 150 total Valkyries produced.

If you want to know all the nitty gritty details of Aston’s hypercar, make sure to check it out in our previous Valkyrie coverage. And enjoy the sound of its Cosworth V12, too. It’s downright magical to hear.

Related video:

Original Lamborghini Countach designer wants no association with 2021 remake

The designer of the groundbreaking 1974 Lamborghini Countach, Marcello Gandini, has issued a remarkable statement to the press regarding the recently released Countach LPI 800-4. In it, he repeatedly affirms that he had nothing to do with the revived Countach that Lamborghini revealed at Monterey Car Week on the occasion of the model’s 50th anniversary.

Gandini alleges that Lamborghini may have misled the public into thinking he had something to do with the Sián reskin, and he wants to make it clear that he had nothing to do with it.

“The external public, seeing and reading what has been communicated by Automobili Lamborghini and consequently by the media during recent weeks, may be led into believing that Marcello Gandini was a part of, or was involved with, or the project may have had his blessing. It is therefore appropriate to clarify the facts and reiterate that he did not participate in, nor was he aware of the project in any way.”

Rarely has a designer of Gandini’s stature and repute so publicly refuted a company they’ve worked for. Though Gandini penned cars from the humble Renault 5 to the masterful E12 BMW 5 Series to the incredible Lancia Stratos, it is Lamborghini — where he was responsible for the legendary Miura, Espada, Marzal and Countach, among others — that Gandini is historically most closely associated with. 

Some of the confusion Gandini references stems from a video published by Lamborghini earlier this year. In it, Gandini talks about his design philosophy (which, ironically, includes breaking new ground with every design) and current Lamborghini head of design Mitja Borkert presents Gandini with a scale model of the then-upcoming Countach LPI 800-4. The latter believes that his presence in the video equates to tacit approval of the new design.

“Neither earlier, nor during the interview was it stated that the car was scheduled for limited series production. With the elegance and kindness that have always distinguished Marcello Gandini, when Mitja Borkert presented the scale model during the interview, the former did smile and acknowledge as would be customary to do so.”

Gandini believed that the model was the end of it, but after Lamborghini pulled the wraps off of the LPI 800-4, he says he received “countless requests for clarification” from press and colleagues in the auto design field. He decided to issue the statement to make clear he had nothing to do with the remake. Furthermore, he wants the public to know that he’s against the idea altogether. And though he doesn’t criticize the design itself, he skewers the notion of a remake.

“Thus, Marcello Gandini would like to reaffirm that he had no role in this operation, and as the author and creator of the original design from 1971, would like to clarify that the makeover does not reflect his spirit and his vision. A spirit of innovation and breaking the mould which is in his opinion totally absent in this new design: ‘I have built my identity as a designer, especially when working on supercars for Lamborghini, on a unique concept: each new model I would work on would be an innovation, a breaker, something completely different from the previous one. Courage, the ability to create a break without sticking to the success of the previous car, the confidence in not wanting to give in to habit were the very essence of my work’, explains Marcello Gandini. ‘It is clear that markets and marketing itself has changed a lot since then, but as far as I am concerned, to repeat a model of the past, represents in my opinion the negation of the founding principles of my DNA.'”

For its part, Lamborghini has issued its own response to Gandini, which Top Gear published. The company explains that the Countach LPI 800-4 was the work of designers at their Centro Stile and R&D department.

“The Company has never attributed any role to Marcello Gandini in the realisation of the Countach LPI 800-4. Instead, Automobili Lamborghini have invited Mr Gandini to take part in an interview that took place in June 2021. This was a conversation with the designer and Head of Centro Stile Lamborghini about the comparison between the old model and the new one.”

It’s understandable that Gandini wants to protect his legacy and name, but it also seems obvious that Lamborghini never meant to mislead the public about his involvement. However, it must be said that all 112 units have already been sold out, so someone out there does appreciate them.

All in all, it’s a regrettable misunderstanding that has marred what should otherwise be a golden anniversary celebration of one of the most famous and beloved cars of all time. Perhaps we should just ignore it and revel in the Countach LP500 concept rebirth instead.

Related video:

Lamborghini Huracan STO First Drive Review | No shortage of show

Malibu, Calif — There’s no shortage of show in LA. From studio moguls rolling in ultraluxe sedans to wannabe racers using freeways as their own personal circuits, the city of Angels explodes with vehicular energy— much of it, inauthentic.

And then there’s the 2022 Lamborghini Huracan STO.

Slathered in scoops, spoilers, and ducts, the Huracan STO looks like every go-fast visual cliché brought to life, a caricature of real deal racecars. This one is even finished in blue and orange, a sort of flamboyant take on Gulf livery. But the STO’s story is actually authentic.

The last Huracan variant approaching this level of hardcore was the Huracan Performante (2017-2019), which many (including this author) credited as the brand’s first credible track weapon. The subsequent Huracan EVO was launched at Bahrain’s F1 circuit and loaded with ambitious tech. However, its chassis setup, which combined four-wheel steering and a variable steering ratio, lacked the consistency and edge needed for serious track driving. 

This time around, the STO draws legitimate inspiration from Lambo’s Super Trofeo and GT3 race cars, which have helped the brand claim more than 100 GT3 wins and three outright Daytona 24 Hours victories in a row. Not a bad starting ground in a bid for relevancy. The STO’s intricate skin is 75% carbon fiber, helping shed some 95 pounds over the Performante. And while it claims 37% more aerodynamic efficiency over its predecessor, the STO’s massive, three-way adjustable rear wing manages a staggering 926 lbs of downforce at 174 mph, which is 53% more than the Performante. Aiding the effort are magnesium wheels and a 20% lighter windshield. Though Lamborghini only publishes dry weight figures (and the STO claims a mere 2,950 lbs without fluids), it’s fair to say that featherweighting has been aggressively pursued. The suspension is more aggressive due to stiffened bushings, revised stabilizer bars, and an updated magnetic adaptive damper setup. Oh, and the frunk? In yet another motorsports nod, it’s designed to accommodate a full-face helmet.

The STO’s 5.2-liter V10 produces the same 640 metric horsepower as the Huracan EVO (that would be 631 in the horsepower you’re more familiar with). For reference, that figure is actually more than Lamborghini’s GT3 and Super Trofeo race cars, which are both rated at 620 metric horsepower — though the GT3’s engine is limited to 550 metric hp in order to conform to the FIA’s balance of power regulations. The STO’s torque drops from the EVO’s 443 pound-feet to 417 lb-ft, with the upside of greater throttle response and quicker shift times from the seven-speed dual-clutch transmission. The torque reduction is also counteracted by ditching the all-wheel-drive powertrain for a rear-drive configuration, saving valuable weight.

Special six-piston front and four-piston rear Brembo CCM-R brakes borrow F1 tech for quadruple the amount of thermal conductivity over standard carbon ceramic stoppers. Maximum braking power also improves by 25%, and a dashboard display offers a brake temperature monitoring readout. Interestingly, the Pirelli P-Zero’s sidewalls were deemed too soft for the STO’s elevated downforce and cornering loads, which led Lamborghini to develop a special street and track compound with Bridgestone tires.

Our tester’s optional trim packages lend it an extravagantly customized feel inside, with contrasting black and white blocks of leather and Alcantara. This particular example flaunts a laundry list of trim options including “Full Livery Exterior Pack” ($37,800), “Contrast Pack” ($4,000), “Full Exterior Carbon Pack” ($21,600), and “Dark Chrome and Carbon” ($8,600). And that’s just for starters. In fact, the options list is so lengthy on our borrowed sled that already had the hefty starting price of $327,838 balloons to a remarkable $442,033 thanks to the sky-high pile of extras.

Ameliorating the dizzying expense is the heady blast of the naturally aspirated V10, which alerts neighbors and friends blocks away that there’s a braggadocious bad boy in town. There’s still nothing quite like sitting in a Lamborghini and firing up a big naturally aspirated V10, even if its doors open this way –>, not that ^^ way. The Huracan’s seats still sit surprisingly tall within the cabin, but the lack of floormats and bare carbon fiber door panels drive home the racecar theme. The digital dashboard and centrally positioned touchscreen add a techy touch. That said, the extreme reductionism annoyingly removes the volume knob. You have to dig into the touchscreen to adjust the sound level.

As before, drive modes are controlled via a small red toggle at 6 o’clock on the steering wheel, managing the behavior of the engine, transmission, traction control, stability control, rear-wheel steering, torque vectoring, and ABS. In this case, the modes are named STO, Trofeo, and Pioggia— street, race, and rain— and each delivers a palpably different character. Pull away in Pioggia, and the STO plays docile and soft, responding to inputs like a purring pussycat. Tap into Trofeo, and the Lamborghini turns into an easily angered predator, with a razor throttle response and sharp immediacy to steering inputs. This is the mode that makes the STO feel most consistent with its aggro looks: it begs you to jam the throttle, which in turn can kick the tail out with dramatic tirespin. Trofeo isn’t the mode you want if you’re seeking the quickest lap times, but it’s arguably the most fun, uncorking the fiery personality of the STO’s sonorous V10, and its disarming effects on yaw angle. While it’s not the torquiest at lower rpm, the engine winds itself up to produce a satisfying rush of power as the virtual tach climbs to a satisfying 8,500 rpm redline. STO mode minimizes the drama in the interest of lap times, trading tire spin for forward motion and curtailing slides in order to more effectively clip apexes. It’s a less fun, but more effective way to maximize this Lamborghini’s elevated abilities.

Piloting the STO through Malibu’s most challenging canyon roads reveals staggering reserves of performance beneath its (mostly) carbon fiber skin. Unlike the EVO, there’s no second guessing the intentions of the chassis, just a direct, linear relationship between driver inputs and vehicle dynamics. The STO meets and exceeds speed limits with staggering ease. And its outrageous appearance would make pleading your cause to an officer of the law all but impossible. This is a supercar that looks fast, and goes even faster— especially when delving towards its indicated 8,500 rpm redline, where the cabin is blasted with the brain rattling roar of the V10.

Despite the considerable sound and fury, there isn’t much learning curve needed to manage the STO’s capabilities, primarily because its machinery feels more analog than digital. Credit the linearity of the naturally aspirated engine, which lacks a turbocharger’s ramp-up under boost. However, the bigger differentiator here is the chassis: the steering, with its fixed ratio in the STO, feels intuitive and offers good feel, the connection to the road yields (mostly) predictable results. The exception is when the throttle is mashed and the sticky Bridgestones are overcome, and at higher speeds it feels like the aero’s considerable downforce is helping keep the wedgy two-seater in contact with tarmac. Brakes? We barely tapped into their capacity on the road despite heavy application, lending credibility to Lamborghini’s claims of their trackworthiness.

If anything, experiencing the Huracan STO on public roads reveals the striking difference between its stratospheric performance envelope, and the stifling limitations of the real world. The STO can have your license yanked quicker than you can say Super Trofeo Omologata, its namesake which indicates its homologation from racing. But what a way to go: this latest Lamborghini samples the best of what its winning race cars have to offer, while offering navigation, Bluetooth, and a sound system that’s almost decent enough to overpower the plaintive wail of its V10. In spite of the creature comforts, the roadgoing STO manages to lap the Hockenheim circuit in 1:48.86, a mere 2 seconds behind its racecar counterpart, which wears slicks.

Its maker calls this Huracan a “celebration of the combustion engine,” which couldn’t be a truer statement since all Lamborghini model lines will be hybridized by 2024. Until then, savor the STO, which achieves its mission of putting a racecar on the road with stunning totality.

Lamborghini Countach LP 500 prototype reconstruction baptized on track

After making a static debut at the Concorso d’Eleganza Villa d’Este, the reconstructed 1971 Lamborghini Countach LP 500 prototype has met the track for a proper shakedown. A banner day for all involved, no doubt, Pirelli loaned its Vizzola Ticino test track to Lamborghini, collector Albert Spiess from Germany and the contributors who helped create the car from scratch.

Spiess said he saw the original prototype at the Geneva Motor Show and then put a Countach poster on his wall as a kid, determined like so many other children for the next 15 years to have one. With the Geneva show car destroyed during crash testing, Spiess eventually determined to convince Lamborghini to build one anew. It likely didn’t take him more than 25,000 hours of cajoling to get a “Si” from the principals in Sant’Agata Bolognese, but that’s how long the carmaker’s historic division, Polo Storico, spent on the reconstruction. Polo Storico chief Stefano Castricini said it took “mad and desperate” research through archival materials, on top of the interviews with original workers and help from suppliers like Pirelli and PPG.  

It doesn’t look like they worked the LP 500 too hard on track, but it’s not like they needed to. In a world awash in seven-figure customs and restomods from manufacturers, and smaller makers putting out cars with specs to make your eyes go googly — there will probably be three more announced next week — this one is special at any speed. For any who’d like to see it for themselves, this very item will be on display at Lamborghini’s MUDETEC Museum of Technologies in Sant’Agata Bolognese until November 15, alongside the bare tubular chassis of the production LP 400 (the customer cars got a more reliable 4.0-liter 12-cylinder instead of the prototype’s 5.0-liter unit), the second production LP 400 to go down the line, and a Countach 5000 Quattrovalvole.

Related Video:

Bugatti begins winding down Chiron production

Bugatti’s stunningly powerful Chiron has almost reached the end of the line. While the standard model is sold out, there are still some Pur Sport and Super Sport build slots available for buyers who want to add the hypercar to their collection before it sprints off into the sunset.

Developed to replace the Veyron, the Chiron was unveiled at the 2016 edition of the Geneva auto show with a 1,500-horsepower, quad-turbocharged W16 engine mounted behind the passenger compartment. Deliveries started in March 2017, and the 100th unit was delivered to a customer in the Middle East in May of the following year. Bugatti reached the 250-car milestone in February 2020, and it built the 300th Chiron in March 2021. It said that the final examples of the Chiron and the Chiron Sport are either being built or scheduled to be built.

What’s left, then, are less than 40 build slots split between the Pur Sport and the Super Sport (pictured) variants, though Bugatti told Autoblog some of those are slotted for production but haven’t been configured yet. The curtains will close when the final units are built. 

There’s no word yet on how long it will take to fill the remaining build slots; Bugatti stressed that demand for the Chiron has increased significantly in 2021. Sales doubled and even tripled in some regions during the third quarter of the year. As for what’s next, your guess is as good as ours. Bugatti is now controlled by Rimac so rumors sketching the outline of an electric model are rampant, though nothing is official. We’ve also heard vague details about a second model line, one that could slot below the Chiron, but those reports also remain speculative.

What’s certain is that something will take the torch from the Chiron.

“We will not just recycle what we have — not restyle the Chiron or hybridize the Chiron. We’re developing a completely new product from the ground up. Everything, because we think that’s the best way to go. That product will have an internal combustion engine,” said Mate Rimac.

In the meantime, Bugatti’s factory will stay reasonably busy: the French brand will soon launch production of the EB110-inspired Centodieci, which is limited to 10 examples, and it’s planning to build 40 units of the Bolide, a track-only two-seater that weighs less than a Subaru BRZ.

Related Video:

Bugatti’s EB110-inspired Centodieci is one hot step closer to production

Bugatti’s heritage-inspired Centodieci is related to the Chiron, but it’s different enough to require its own set of validation tests. After taking on the Nürburgring, the limited-edition hypercar was put through its paces in the scorching heat of the American Southwest’s deserts.

“Testing in the hot, dry desert is a huge help for us in the development process,” explained Stefan Schmidt, an engineer in Bugatti’s overall vehicle development department. “Every model has to run flawlessly in all weather and in all traffic conditions,” he added.

With no less than 27 engineers in tow, the Bugatti team started the hot-weather test in California and meandered east for about 500 miles until it reached Arizona, where temperatures sometimes climb to over 120 degrees. The convoy included eight cars: a Centodieci prototype, three examples of the Chiron Pur Sport, and four examples of the Chiron Super Sport. Each one was fitted with approximately 200 sensors that record various parameters that get sent to the engineers traveling with the convoy and to the development team in Wolfsburg, Germany.

Heat takes a toll on cars in normal driving conditions, but Bugatti went the extra mile to torture its prototypes. It subjected them to low-speed stop-and-go traffic, it reached nearly 200 mph (on a closed track, of course), and it left them sitting in the sun with the air conditioning on. The aim is to see how different components (ranging from the fuel delivery system to the materials used to build the cabin) hold up to extreme heat. The data gathered during the tests was compared to the numbers obtained through simulations to identify areas of concern.

Taking the Centodieci to the American desert was important; it’s notably fitted with an additional air intake near the oil cooler.

“The Centodieci’s newly-developed bodywork, airflow changes, and its engine bay cover manufactured from glass mean the temperature behavior is quite different, especially in such extreme heat conditions,” said André Kullig, the manager of few-off projects at Bugatti.

The firm notes that the Centodieci passed the hot-weather tests with flying colors. It has one final hurdle to clear before it enters production: nearly 20,000 miles of high-speed and endurance testing in Europe. When that’s over and everything checks out, the project will be signed off and production of the 10 examples planned will begin in Molsheim, France. Deliveries should start in 2022, and the model is sold out.

Related Video: