aston martin project 003

All posts in “aston martin project 003”

Aston Martin Project 003 details revealed in dealer brochure

Aston Martin showed the as-yet-unnamed Project 003 hypercar at the 2019 Geneva Motor Show. Now that the English carmaker is accepting deposits for the coupe, it has provided dealers with brochures for prospective customers. Two of those prospective customers let Carscoops and Diario Motor flip through the pages and see what the fuss is about. Each site words some of the specifics a bit differently, which we’re not sure is down to the language in the brochure or the way it’s written up. Carscoops says Aston Martin’s targeting a combined 1,000 horsepower, DM says there will be 1,000 hp. Either way, it’s a pleasant ballpark to play in.

We say “combined” because there will be a brand new twin-turbo V6 in back and an electric motor on the front axle. The duo means all-wheel drive in addition to that potential four-figure horsepower. If Aston Martin does hit 1,000 ponies, that would put the “son of Valkyrie” just behind the Valkyrie, which makes all of its 1,160 hp with a naturally aspirated 6.5-liter V12 built by Cosworth.

The brochure says dry weight will come in below 1,350 kilos, or 2,976 pounds. The brochure also asserts a power-to-weight ratio of 750 bhp per tonne. Working backward, that ratio would mean 1,012 hp if the 003 came in right at 2,976 pounds. Shifting through an F1-inspired eight-speed dual-clutch gearbox, the carmaker expects a 0-60 time of “less than 2.5 seconds,” to be expected for a car about 100 pounds heavier than a McLaren 720S with at least 200 more horsepower. And according to Diario Motor‘s telling, top speed will crest 350 kilometers per hour, or 218 miles per hour; Carscoops says terminal velocity lies beyond 220 mph.

Lots of Valkyrie tech will be adapted for the junior coupe, including the active suspension and active ride height, as well as platform control. A limited-slip differential will keep the back end in line with what we’re sure will be fancy electric motor control on the front axle. Seems all that was said about the sci-fi cabin — which TopGear magazine’s Jack Rix showed us recently — is that ingress and egress will be less challenging than on the Valkyrie.

Only 500 units will leave the factory, in both left- and right-hand drive, deliveries to begin in 2021. American purchasers will need to leave $300,000 with their dealers to hold a place in line. Those monies will be applied to an MSRP that starts “at no less than £875,000” before options, or roughly $1.2 million in green money.

April 10, 2019 / Comments Off

486

‘Top Gear’ takes us inside the Aston Martin Project 003

“Top Gear” magazine’s Jack Rix might be the ideal lad to lock in a room with a cool car and a camera. After taking us on tours of the Mercedes-AMG One and Honda Urban EV concept, he’s wandered into another anteroom with the Aston Martin Project 003 and Vanquish. When we saw the mid-engined coupes at the Geneva Motor Show, it looked like Aston Martin programmed the Valkyrie family’s design language to “softer” on the RMB-003 and “softest” for the Vanquish. We wanted more details.

Cue Mr. Rix. The deputy editor fills us in on trivia like the combined weight of the Project 003 headlights and taillights being less than the weight of a single DB11 headlight. He also shows us how the NASA-aided FlexFoil wing works, and where the potential rear-view cameras would be mounted.

Then he gets inside an interior that’s “a bit more civilized” than that on the Valkyrie for not putting hip level beneath knee level. However, notice that here, too, the seat is built into the carbon fiber tub — the end of the seat bolster is flush with the footwell. And check out those vents that triple as speakers and ambient lighting.

Rix can only walk around the Vanquish, since that car’s not due until 2022, a year after the Project 003. Nevertheless, there are plenty of Easter eggs to share, like how design elements from front-engined Aston Martins have been integrated throughout the mid-engined bodywork.

As a bonus feature, Aston Martin has taken a separate look at Valkyrie development through the eyes of high-performance test driver Chris Goodwin. The racer explains how he’s using the Red Bull Formula 1 team’s simulator to tune the Valkyrie road car’s handling, active suspension, and aerodynamic systems. Goodwin was McLaren Automotive’s test driver and worked on the Speedtail, so it could mean something when he says of the Valkyrie, “It’s going to be a substantial gap between this car and what’s currently available on the market.”

March 22, 2019 / Comments Off

474

Aston Martin Project 003 is a road-going evolution of Valkyrie

The Aston Martin Project 003 will effectively be the most road-going example of Aston’s mid-engined hypercars. It quite obviously draws heavily from the Valkyrie (aka Project 001), which is as much the result of aerodynamic requirements as it is maintaining a family resemblance. It may not appear to be as extreme in certain respects, and it isn’t, but it does feature a number of advances.

The 003 utilizes the next-generation of “aircraft morphing technology, to create a variable airfoil across the entirety of the rear wing. The technology named FlexFoil … has been validated by NASA through extensive performance and acoustic flight testing, with Aston Martin the first to implement this cutting-edge aerospace technology in the automotive industry. The system allows for the car’s downforce to be changed without changing the physical angle of the entire element.”

So yeah, fancy stuff, and in fact, the production version will feature an even further evolution of the technology.

Aston hasn’t released full details, but did indicate the 003 will be powered by a hybrid powertrain consisting of a new turbocharged V6 developed in-house. This is in contrast to the Mercedes-sourced engines in recent Aston Martins. It will feature a sealed oil system previously utilized in the Aston Martin Vulcan and in multiple 24-hour endurance races that allows for oil changes in 90 seconds and the refinement and reuse of the engine oil itself. The production 003 will be the first road-going car to receive this technology.

Aston Martin Project 003

There is plenty shared with Valkyrie, however, including the active suspension and various electronic systems. Aston says the chassis will be “blessed with next-level precision, control and driver connection for class-leading dynamics on road and truck.”

Also like the Valkyrie, Project 003 utilizes a lightweight carbon fiber structure with carbon fiber bodywork. It was shaped for maximum aerodynamic effect, which results in the two mid-engine hypercars sharing a common shape and general look. One noteworthy visual difference are the front and rear lighting units. Their lightweight technology are shared, however. Aston Martin says the 003’s four lighting units weigh less than one DB11 headlamp.

Inside is where the 003 most ventures away from the Valkyrie, and where it demonstrates its more road-going nature. Greater concessions have been made for usability and comfort, although that is certainly relative. LMP1-style doors bring part of the roof with them when opening, making getting in and out a bit easier. The center console has also been widened to create more space between occupants (although you’re still awfully close together), while storage areas have been added for “oddments” that Aston indicates would include a wallet or mobile phone. The console itself is also 3D printed, like other interior pieces, to reduce 50 percent of the typical mass and allow for integrated switches.

Other distinctive interior elements includes a display screen mounted to the steering column to prevent the wheel rim from impeding the driver’s view (neat, but an Infiniti G35 did that) and a wraparound band of grilling between the dash and windshield that conceals the air vents, speakers and ambient lighting. The infotainment system is your smartphone — as in there’s literally a mount for a smartphone that, as details are scarce, we’d assume can run a car-related app.

Despite being more road-going, there is no trunk, only a “terrace” behind the seats. So, if you want to take your Aston Martin someplace, a DB11 or Vantage is still the better call. The 003 will be a hypercar, not a GT.

It will also not be called the 003 when production starts in late 2021. Aston Martin indicated the name could change during the Geneva Motor Show, and we will update this story should we receive word of that change.

Related Video:

March 5, 2019 / Comments Off

561